 |
Get plasticboards in suitable size, in the colors of
your
choice.
Sand them both sides, for better bondo.
|
 |
Glue the boards together and let dry under
pressure.
|
 |
When
dryed, cut shape with a saw, as style as you desire. Use fine
blade cutter to not ruin the plastic.
Drill
hole in
the wide end,just in middle, approx. max. 2cm long. Put in a screw to
hold it
Shape it teardrop with a file, or grinder.sanding, and later finer
paper.
To the end you use steelwool,and plain polish on
the button.
|
 |
Heres a button finished, ready for gluing or treads
on the switch,
chocke, or gearshift.
Just make different sizes to the use needed.
|
|
When
looking around, buttonmateriale pops in
somewhere, everywhere.
At stores, as perfume bottletops, lipsticks,
stereobuttons, and even also at the toystores the possibillity is to
find anythingto use. Keep the eyes open, and try to see the part used
in another way, and search could be completed.
Plastic sheets of different color is to be found at places to not
belive. .. whites i found at an old lightsign, also as window
iceremover
at the local insurance company. Cutted plastic toolbox at homedep. get
the color. . . . |
|
