 |
Cowl
enginebay fendershields are prefinished together with inside of
front fenders, grinded of dirt & rust, rustproofed and welded were
needed.
Enginebay and cowl shields mounted on left side.
Fabbéd airfilter housing,teardropshaped |
 |
 |
Make new
rubber isolatorband between fenders/ inner guards, renew
bolts/ screws, get all to fit, make heating shields against brake /
steeringparts, clamp mount brakelining, powersteer lines, electrical,
relays, etc.
Looks very fast, just cut away rusted parts, renew, and
Go..........forget it! days of work! |
 |
 |
made new electric, fusebox,connect terminals, etc.
column support w/ servicemeter in stainless steel.
|
 |
 |
Floorpans is renewed with pressed contourlines.
|
 |
 |
Rear
sidepanels is renewed some places and
controlled against dirt in
window waterchannels.This places seems to be storage for leaves, and
other dirt, specially
with bad window scrapelists. Check of drainingpipes is also eccential,
and if needed renewed.
A. window
B. outer/ inner metal
C.water/rirt channel
<< Side panel. Rusted
away( cutted here) water/dirt channel for
renewin.
Channel repaired >>
Whole panel reassemled >>
|
|
 |
Booster reservoar!
rear brakes/ drums, checked and remounted
|
 |
|
|
|
|
|
|
|
